Brand
|
Tektronix
|
MPN
|
TDS3012C
|
Input Channels
|
2
|
Bandwidth
|
100 MHz/500MHz
|
Rise Time (Typical)
|
0.7 ns
|
Sample Rate on Each Channel
|
1.25 GS/s / 2.5GS/s
|
Record Length
|
10 kpoints
|
Hardware Bandwidth Limits
|
20 MHz,
|
Input Coupling
|
AC, DC, GND
|
Input Impedance
|
1 MOhm in Parallel with 13 pF or 50 Ohms
|
Input Sensitivity Range
|
1 MOhm: 1 mV/div to 10 V/div
50 Ohms: 1 mV/div to 1 V/div
|
Vertical Resolution
|
9 bits
|
Maximum Input Voltage
|
1 MOhm:150 VRMS with peaks at
50 Ohms: 5 VRMS with peaks at ≤30V
|
DC Gain Accuracy
|
±2%
|
Position Range
|
±5 div
|
Seconds/Division Range
|
1 ns to 10s
|
Trigger Base Accuracy
|
±20 ppm over any 1 ms time interval
|
Trigger Modes
|
Auto (supports Roll Mode for 40 ms/div and slower), Normal, Single Sequence.
|
B trigger
|
Trigger after time or events
|
Trigger after time range
|
13.2 ns to 50 s
|
Trigger after events range
|
1 to 9,999,999 events
|
Ethernet Port
|
RJ-45 connector, supports 10Baste-T LAN
|
USB Port
|
Front-panel USB 2.0 host port. Supports USB flash drive.
|
GPIB port
|
Full talk/listen modes, setting and measurements. (optional with TDS3GV communications module)
|
RS-232C port
|
DB-9 male connector, full talk/listen modes; control of all modes, settings and measurements.
Baud Rates up to 38,400 (optional with TDS3GV communications module)
|
VGA Video
|
DB-15 female connector, monitor output for direct display on large VGA-equipped monitors (optional with TDS3GV communications module)
|
External Trigger Input
|
BNC connector, input impedance >1 MOhm in parallel with 17 pF; max input voltage is 150 VRMS
|
Source Voltage
|
100 VRMS to 240 V RMS ± 10%
|
Source Frequency
|
45 Hz to 440 Hz from 100V to 120 V
45 Hz to 66 Hz from 120V t 240 V
|
Power Consumption
|
75W Max
|
Battery Power
|
Requires TDS3BATC, rechargeable lithium ion battery pack [not included]
|
Rackmount (RM3000) [WxHxD]
|
19x7x6” (484x178x152 mm)
|
