:::현재위치 HOME ▶ 중고제품 ▶ Hioki ▶ AC/DC Current Probe 3274        AC/DC Current Probe 3274 판매가격 :   주문수량 : 브랜드 : 01 합계금액 :     ▷ 간단한 설명   AC/DC Current Probe Hioki 3274 - 10MHz 150A AC/DC     AC/DC Current Probe Hioki 3274 wide bandwidth and high sensitivity conditions. Specifications Hioki 3274 Frequency Band Width DC to 10 MHz (-3 dB) Rise Time =<35 ns Noise Level 25 mA rms max. (band width limited to 20 MHz) Continuous Allowable Input 150 A rms (requires derating at frequency) Max. Allowable Peak Input 300 A peak (non continuous), 500 A peak (pulse width: 30 μs or shorter) Amplitude Accuracy ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 150 A rms) ±2.0 % rdg. (DC, 45 to 66 Hz, 150 A to 300 A peak) Output Rate 0.01 V/A (use with a device having a 1 M-ohm input resistance or higher) Max. Rated Voltage to Earth 600 V CAT II, 300 V CAT III (insulated wire) Core Jaw Dia. Ø20 mm(0.79 in) Power Supply ±12 V ±0.5 V, 5.5 VA max. (at Max. current measurement) Dimensions 176 mm (6.93 in)W × 69 mm (2.72 in)H × 27 mm (1.06 in)D, 500 g (17.6 oz), Sensor cable BNC terminal: 2 m (6.56 ft), Power cable: 1 m (3.28 ft), Power plug: FFA.0S.304.CLAC42Z / LEMO inc. Frequency bandwidth DC to 10 MHz (-3 dB) Rise time =<35 ns Noise level 25 mA rms max. (bandwidth limited to 20 MHz) Continuous allowable input 150 A rms (requires derating at frequency) Max. allowable peak input 300 A peak (non continuous), 500 A peak (pulse width: 30 μs or shorter) Amplitude accuracy (30 min. after power-on, after degaussing and zero-adjustment) ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 150 A rms) ±2.0 % rdg. (DC, 45 to 66 Hz, 150 A to 300 A peak) Output rate 0.01 V/A (use with a device having a 1 MΩ input resistance or higher) Core diameter φ 20 mm (0.79 in) Power supply ±12 V ±0.5 V, 5.5 VA max. (at max. current measurement) Dimensions and mass 176 mm (6.93 in)W × 69 mm (2.72 in)H × 27 mm (1.06 in)D, 500 g (17.6 oz), Sensor cable BNC terminal: 2 m (6.56 ft), Power cable: 1 m (3.28 ft), Power plug: FFA.0S.304.CLAC42Z / LEMO inc. Accessories Instruction manual ×1, Carrying case × 1 Compatible models Model 3273-50, 3274, 3275 or 3276 × 1 unit. (One sensor only) Note: May be used with up to 2 units of Model 3273 (not -50 type), and up to 2 units of Models 3273-50, 3274, 3275 or 3276 on condition that the measurement current is sufficiently low. Please check with your HIOKI distributor. Power supply 100 V or 120/ 220/ 240 V AC (specify when ordering), 50/60 Hz 20 VA max. Dimensions and mass 73 mm (2.87 in) W × 110 mm (4.33 in) H × 186 mm (7.32 in) D, 1.1 kg (38.8 oz) Accessories Power cord ×1, Instruction manual ×1, Spare fuse ×1 Frequency bandwidth DC to 10 MHz (-3 dB) Rise time =<35 ns Noise level 25 mA rms max. (bandwidth limited to 20 MHz) Continuous allowable input 150 A rms (requires derating at frequency) Max. allowable peak input 300 A peak (non continuous), 500 A peak (pulse width: 30 μs or shorter) Amplitude accuracy (30 min. after power-on, after degaussing and zero-adjustment) ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 150 A rms) ±2.0 % rdg. (DC, 45 to 66 Hz, 150 A to 300 A peak) Output rate 0.01 V/A (use with a device having a 1 MΩ input resistance or higher) Core diameter φ 20 mm (0.79 in) Power supply ±12 V ±0.5 V, 5.5 VA max. (at max. current measurement) Dimensions and mass 176 mm (6.93 in)W × 69 mm (2.72 in)H × 27 mm (1.06 in)D, 500 g (17.6 oz), Sensor cable BNC terminal: 2 m (6.56 ft), Power cable: 1 m (3.28 ft), Power plug: FFA.0S.304.CLAC42Z / LEMO inc. Accessories Instruction manual ×1, Carrying case × 1 Frequency bandwidth :DC to 10 MHz (-3 dB) Noise level : 25 mA rms max. (bandwidth limited to 20 MHz) Continuous allowable input -150 A rms (requires derating at frequency) Max. allowable peak input - 300 A peak (non continuous), 500 A peak (pulse width: 30 μs or shorter) Power supply : ±12 V ±0.5 V, 5.5 VA max