:::현재위치 HOME ▶ 중고제품 ▶ Voltech .BK,AC Power Analyzer ▶ POWER HiTESTER Hioki 3332        POWER HiTESTER Hioki 3332 브랜드 : 01   ▷ 간단한 설명   POWER HiTESTER Hioki 3332 - Single-phase 2-wires - Voltage range: 15/ 30/ 60/ 150/ 300/ 600 V AC - Current range: 1/ 2/ 5/ 10/ 20/ 50/ 100/ 200/ 500 mA, 1/ 2/ 5/ 10/ 20/ 50 A AC - Frequency range: Auto/ 500 Hz/ 100 kHz - 상태 : Very Good     POWER HiTESTER   Hioki  3332     Can measure very low effective power, for stand-by mode of home use equipment Ultra high-sensitive measurement, for use to measure an effective power of equipment in stand-by mode: Current 1.0000 mA full-scale, 0.1 µA resolution Wide measurement range, up to 50.000 A direct input Basic specifications (Accuracy guaranteed for 6 months) Measurement lines Single-phase 2-wires Measurement items Voltage, Current, Current peak, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Power integration, Current integration Measurement ranges Voltage range: 15/ 30/ 60/ 150/ 300/ 600 V AC Current range: 1/ 2/ 5/ 10/ 20/ 50/ 100/ 200/ 500 mA, 1/ 2/ 5/ 10/ 20/ 50 A AC Depends on combination of voltage and current range (Power range: 15.000 mW to 30.000 kW) Frequency range: Auto/ 500 Hz/ 100 kHz (select voltage or current) Input resistance (50/60 Hz) Voltage: 2 MΩ, Current: 2 mΩ or less (direct input) Basic accuracy ±0.1 % rdg. ±0.1 % f.s. (active power, at 45 to 66 Hz) Display refresh rate 5 times/second Frequency characteristics 1 Hz to 100 kHz Integration measurement Data update time: 5 times/sec, Measurement range: 0.00000 m to ±999999 MAh/MWh, (integration time up to 10,000 hours) Wave peak measurement Current (displays maximum absolute value), Effective input range: Six times the current range, or Max. 90 A peak D/A output Number of channels: 1 ch, Output items: Voltage, Current, Current peak, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Integration Analog output Voltage, Current, Power simultaneously, DC ±5 V f.s. Monitor output Voltage, Current simultaneously (waveform output), 1 Vrms f.s. Other functions Comparator function for 2 measurement items (Decision for Hi /In /Lo and results output), Backup, Scaling, Average function Interface RS-232C, GP-IB standard Power requirements 100 to 240 V AC, 50/60 Hz, 40 VA max. (at 100 to 120 V AC), 50 VA max. (at 200 to 240 V AC) Dimensions, mass 210 mm (8.27 in) W × 100 mm (3.94 in) H × 261 mm (10.28 in) D, 2.7 kg (95.2 oz) Supplied accessories Instruction Manual × 1, Power cord × 1, Connector for EXT I/O × 1