½ÅÁ¦Ç°
Áß°íÁ¦Ç°
ƯÆǼҰ³
°èÃø±â ÀÔ°í List
´Ù¿î·Îµå
±ÝÀÏƯ°¡ÆǸÅ
ÀÔ°í¿¹Á¤ LIST
:::ÇöÀçÀ§Ä¡ HOME
¢º
Áß°íÁ¦Ç°
¢º
Voltech .BK,AC Power Analyzer
¢º Power Quality Analyzer Fluke 43B
Power Quality Analyzer Fluke 43B
ÆǸŰ¡°Ý
:
ÁÖ¹®¼ö·®
:
ºê·£µå
:
01
ÇÕ°è±Ý¾×
:
¢¹ °£´ÜÇÑ ¼³¸í
Power Analyzer
Fluke 43B
-True-rms voltage (ac + dc)
Ranges: 5.000 V, 50.00 V, 500.0 V, 1250 V*
-True-rms current (ac + dc)
Ranges: 50.00 A, 500.0 A, 5.000 kA, 50.00 kA, 1250 kA
Power Quality Analyzer
Fluke 43B
Specifications
Input Characteristics
Input impedance
1 M¥Ø, 20 pF
Voltage rating
600V rms, CAT III
V/A/Hz Display
True-rms voltage (ac + dc)
Ranges:
5.000 V, 50.00 V, 500.0 V, 1250 V*
Accuracy:
¡¾(1% + 10 counts)
True-rms current (ac + dc)
Ranges:
50.00 A, 500.0 A, 5.000 kA, 50.00 kA, 1250 kA
Accuracy:
¡¾(1% + 10 counts)
Frequency
Ranges:
10.0 to 15.0 kHz
Accuracy:
¡¾ ([% of reading] + [counts]): 0.5% + 2
CF Crest factor
Ranges:
1.0 - 10.0
Accuracy:
¡¾(5% + 1 count)
Power Display
Watts, VA, VAR
1-phase and 3-phase,3 conductor balanced loads
Ranges:
250 W - 1.56 GW
Accuracy:
¡¾(4% + 4 counts) Fundamental Power
Accuracy:
¡¾ (2 % + 6 counts) Total Power
PF Power Factor
Range:
0 - 1.0
Accuracy:
¡¾0.04
DPF Displacement Power Factor, Cos .F
Range:
0.25 - 0.9
Accuracy:
¡¾0.04
Range:
0.90 - 1.0
Accuracy:
¡¾0.03
H2 Frequency Fundamental
Ranges:
40.0 to 70.0 Hz
Accuracy:
¡¾ ([% of reading] + [counts]): 0.5% + 2
Harmonics Display
Voltage, Current, Frequency
Ranges:
Fundamental to 51st harmonic
Accuracy:
Fundamental:
VA ¡¾(3% + 2 counts) W ¡¾(5% + 2 counts)
2 to 31st harmonic:
VA ¡¾(5% +3 counts) W ¡¾(10% +10 counts)
32 to 51st harmonic:
VA ¡¾(15% +5 counts) W ¡¾(30% +5 counts)
Frequency Fundamental
Ranges:
40 Hz to 70 Hz
Accuracy:
¡¾0.25 Hz
Phase
Range:
V, A (between Fundamental & Harmonics)
Accuracy:
¡¾3¨¬ to ¡¾15¨¬
Range:
W (between Voltage Fundamental & Current Harmonics)
Accuracy:
¡¾5¨¬ to ¡¾15¨¬
K-factor (Current and Power)
Range:
1.0 to 30.0
Accuracy:
¡¾10%
THD Total Harmonic Distortion
Range:
0.00 - 99.99
Accuracy:
¡¾(3% + 8 counts)
Sags and Swells
Recording times:
4 min to 16 days (selectable)
Vrms Actual, Vrms max, min(AC + DC)
Ranges:
5.000V, 50.00V, 500.0V, 1250V*
Accuracy:
Readings ¡¾(2% +10 counts); Cursor readings ¡¾ (2% + 12 counts)
Arms Actual, Arms max, min (AC + DC)
Ranges:
50.00A, 500.0A, 5.000 kA, 50.00 kA
Accuracy:
¡¾(2% +10 counts)
Transient Capture
Minimum pulse width:
40 ns
Useful bandwidth input 1:
DC to 1 MHz
Number of transients:
40
Voltage threshold settings:
20%, 50%, 100%, 200% above or below reference
Reference signal:
After START, the Vrms and frequency of the signal are measured. From these data a pure sinewave is calculated as reference for threshold setting.
Vpeak min, Vpeak max at cursor:
10 V, 25 V, 50 V, 125 V, 250 V, 500 V, 1250 V Accuracy: ¡¾5% of full scale
R, C, Diode, Continuity
Resistance ranges:
500.0 ¥Ø, 5.000 k¥Ø, 50.00 k¥Ø, 500.0 k¥Ø, 5.000 M¥Ø, 30.00 M¥Ø
Resistance accuracy:
¡¾(0.6% + 5 counts)
Capacitance ranges:
50.00 nF, 500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF
Capacitance accuracy:
¡¾(2% + 10 counts)
Diode Ranges:
0 to 3.000 V
Diode voltage:
Accuracy:
¡¾(2% + 5 counts)
Continuity:
Beeper on at < 30 ¥Ø ¡¾ 5 ¥Ø
Max current:
0.5 mA
Temperature:
¡ÆC or ¡ÆF
Inrush Current
Inrush times:
1 s, 5 s, 10 s, 50 s, 100 s, 5 min
Current ranges:
1 A, 5 A, 10 A, 50 A, 100 A, 500 A, 1000 A
Cursor readings:
A peak max at cursor 1 and cursor 2
Accuracy:
¡¾5% of full scale
Time between cursors:
4 to 235 pixels (1 pixel = inrush time/250) Accuracy: ¡¾(0.2% + 2 pixels)
Temperature (with accessory)
Range:
-100 ¡ÆC - 400 ¡ÆC
Accuracy:
¡¾(0.5% + 5 counts)
Scope Display
Measurements:
dc, ac, ac+dc, peak, peak-peak, frequency, duty cycle, phase, pulse width, crest factor
Time ranges:
20 ns/div to 60 s/div
Max sampling rate:
25 MS/s
Bandwidth
Voltage channel [1]:
20 MHz at inputs, 1 MHz with TL24 Leads
Current channel [2]:
DC to 15 kHz at inputs, 10 kHz with i400s Current Clamp
Coupling:
AC, DC (10 Hz - 3 dB)
Vertical sensitivity:
5 mV/div to 500V/div
Vertical resolution:
8 bit (256 levels)
Record length:
512 samples per channel
Base ranges:
60 S/div to 20 nS/div ¡¾ (0.4% + 1 pixel)
Timebase modes:
Normal, roll, single
Pre-trigger:
Up to 10 divisions
Trigger Source:
Input 1 or Input 2 or automatic selection
Trigger Mode:
Automatic Connect-and-View¢â, Free Run, and Single Shot
Connect-and-View¢â:
Advanced automatic triggering that recognizes signal patterns
Automatically adjusts triggering, timebase and amplitude and displays stable pictures
Memories
20 (screens, settings, data)
Recording
Recording times:
4 min to 16 days (selectable)
Parameters:
Choose one or two parameters from one of the groups below:
Volts/Ampères/Hertz
Power:
Watts, VA, VAR, PF, DPF, Frequency
Harmonics, THD, Volts (Fund. & Harmonic), Ampères (F&H) Watts(F&H)
Frequency (H), %(H) of total, Phase(H), KF
Temperature
Resistance:
Resistance, Diode, Continuity, Capacitance
Scope:
DC Voltage, DC Current, AC Voltage, AC Current, Frequency,
Pulse Width + or -, Phase, Duty cycle + or -, Peak max, Peak min, Peak min-max, Crest Factor
Note
*Rated EN 61010-1 600 V CAT III CSA
Environmental Specifications
Operating Temperature
0¡ÆC to +50¡ÆC
Safety Specifications
Electrical Safety
EN 61010-1 CAT III, 600V. CSA listed
Mechanical & General Specifications
Size
232 x 115 x 50 mm
Weight
1.1 kg
Warranty
3 years
Battery Life
Rechargeable NiMH pack (charger included), 6.5 hrs extended operating time (continuous)
Shock & Vibration
Mil 28800E, Type 3, Class III, Style B
Case
IP51 (dust, drip, waterproof)
101-09-66502±èÁø¼ö
ÁÖ¼Ò : ¼¿ïƯº°½Ã Á¾·Î±¸ Á¾·Î26±æ 28(¿øâºôµù 158È£)
ÀüȹøÈ£ : 02-2268-7345 Æѽº : 02-2263-7345
USA Office : 3268 W 6th St Los Angeles CA90020 UNITED STATES
YoungSir Trade Telecom co.
e-mail :
ys7345@korea.com
/
ys7345@hotmail.co.kr
²ô±â